The Beadhopper Interchangable Jewellery System is an ingenious way to turn your favourite bead into gorgeous and showstopping piece of jewellery. The Necklace has a 'Ready to Wear' principle and the Pendants has the 'Stack and Screw' principle. Both you can change your bead in the blink of an eye.
The Beadhoppers Interchangeable Curved Necklace kit includes a stainless steel neckwire which is nylon coated and very skin friendly, and 1x threaded pin is 1.4mm thick and 50mm in lenght (44mm fillable space). Since the horizontal pin is the same diameter as the beadhopper pendant system, you can add any of the "filler stuff", like bead caps or balls and tubes, or you can pick just the right size pin and showcase just the bead. Changing your bead is as easy as all of the beadhopper jewelry: just open the clasp, pull the wires through the hole of the round silver bead which threads onto the pin, unscrew one bead, switch your bead and any parts you used on the pin, re-screw the silver bead and feed the wires back to the whole. The bead does not have to be screwed on very tight, the system makes it impossible for the pin to unscrew while wearing the necklace. The neckwire has a simply way to open and close. In order to stay closed it needs TENSION inside the tube. So before you wear the neckwire it is recommended that you bend the wire slightly to give it a kink. Then close the neckwire just push the wire through the tube, making sure that you push all the way over the kink. All threaded parts of the system are crafted with an outstanding quality and are covered with a high quality silver plating. The threaded parts are made of brass to guarantee the perfect quality and durability of the fine threadings. The non thread parts are made of copper. Additionally all threaded parts are finished with a tarnish-resistant sealant to keep them looking bright for a long time.