Loading...

Wire Working Tools


Beading Foundation - Lacy's Stiff Stuff

CODE: BSSS45

$4.30
In stock

Lacy's Stiff Stuff

Lacy's Stiff Stuff is a beading foundation and craft medium which is perfect for cab beading, bead applique and more. It eliminates the need for frames, hoops, or cardstock when doing beaded cabochons.

Lacy's Stiff Stuff stays stiff after wetting or dyeing without shrinking. Draw on it, trace through it or apply iron-on transfers.


Bench Block - Steel

CODE: BSBB22

$37.00
In stock

Steel Bench Block

These Bench Blocks are made of Finely Polished Case–Hardened Steel. They are excellent for Laying out work, Flattening Wire and Chasing. Keep this on your work surface, and use it to strengthen your wire work designs and create unique flatten/hammered wire pieces. 

Using a Chasing Hammer, you can strengthen your designs by striking the wire with one or two hits. Using a Ball Pein Hammer, you can create unique textures on your wire and metal pieces. To help reduce the amount of flattening the hammer does to your wire when you hit it to harden it, a Plastic Hammer or Rawhide Mallet could be used.

by BeadSmith


Bench Pin with V-slot and Clamp

CODE: BSBPW6

$14.75
In stock

Bench Pin with V-slot and Clamp

Clamp to surfaces up to 2" (5cm) thick and offers the combination of a milled, smooth anvil with a replaceable wooden pin

Quality hardwood with a deluxe clamp which clamps easily onto benched edge with up to 1-3/4" (4.5cm) thick.


Brush - Hard Bristles - Plastic Handle

CODE: TBRHBPLH

$14.95
In stock

Brush

This Hard Bristle brush is great for removing rust and dirt from metal surfaces. It features hard nylon bristles mounted in a heavy duty clear plastic handle.

Can also be used to help polish PMC work.


Brush - Scratch

CODE: BSBRUSH02

$10.00
In stock

Scratch Brush.

This scratch brush has Figerglass Bristles with Metal Ferrule.

by BeadSmith


Clamps - Ring - Wooden

CODE: BSRNCL01

$17.25
In stock

Ring Clamps - Wooden with Leather Lined Jaw

Ring Clamps are a great tool - especially for silversmithing and metal work. Holds your ring nice and firmly with out damaging it, whilst you sand, file, buff or polish it.

Simply open up the clamp, which can be used at either end, slip you ring into one end, and then push the wedge up into the other end to hold tight. One end of the clamp if rounded, and the other is squared and both have leather lining on the inside of the jaw to help protect your work.


Crochet Hook

CODE: BSCH04

$6.35
In stock

Crochet Hook

These Crochet Hooks are made of Steel and are great to use with crochet cottons and lightweigth yarns as well as for crocheting wire necklaces.


Doming Block - Wooden - 2 Punches

CODE: BSDMW01

$14.95
In stock

Wooden Dooming Block

The Wooden Dooming Block works really well with sheet metal, to create cute cupped designs, and for removing dents and shaping thin soft metals.

This Wooden Doming Block set includes 2 hardwood punches and a 21/4" (5.7cm) square wooden dapper block. It features 6 hemisoherical depressions of different sizes, one on each side, and 2 punches. This allows the versatility of a variety of depth domes, all in one compact design.


Ear Wire Tool - EZ Earring II

CODE: EZEARRING2

$55.20
In stock

EZ Earring II - Custom Ear Wire Making Tool

Creates multiple styles of French Hoop Style ear wires using 20 gauge wire. Artistic wire, Niobium, Gold Filled, Sterling Silver, half hard or softer works great. Includes Photo Instruction Sheet

These ear wires can easily be decorated to coordinate with your jewellery. On a longer shank you can add beads or something larger, like a lampwork bead

by BeadSmith


Files - Needle Set - 10 Piece

CODE: BSNF740

$15.50
In stock

10 Piece Ergo File Needle Set

The Ergo File Needle Set can be used to file rough edges on metal beads and findings or even to shape and detail polymer clay and PMC before and after firing.Their small size also makes them ideal for getting into confined spaces.

The Ergo File Needle Set are made of high grade steel and have a comfortable handle approx 2"(5cm) long and 1/2"(1cm) wide. Files are approx 6"(15cm) long.

The set includes these shapes - 2 round
                                              2 triangle
                                              1 knife
                                              1 half round
                                              1 square
                                              1 oval
                                              2 flat (1 blunt and 1 tapered)

by BeadSmith


Files - Set - 5 Piece

CODE: PHF5

$10.25
In stock

5 Piece File Set

The File Set can be used to file rough edges on metal beads and findings or even to shape and detail polymer clay and PMC before and after firing.Their small size also makes them ideal for getting into confined spaces.


Hammer - Ball Pein

CODE: BSHAM01

$9.95
In stock

Ball Pein Hammer

These Ball Pein Hammers have one flat end & the other is round. It is used for solid striking force. With its solid steel head, it is excellent for flattening & shaping many types of hard or half-hard wires. You will find this tool very comfortable to use because it is geared with a long yet light wooden handle.


Hammer - Nylon

CODE: BSHAM05

$17.60
In stock

Nylon Hammer

This Nylon Hammer has a wooden handle. This hammer cand be used to flatten and shape sheet and wire with no risk of marring. The faces can easily be removed with a half turn.


Hammer - Plastic & Rubber

CODE: BSHAM02

$11.95
In stock

Plastic and Rubber Jewellery Hammer

This lightweight Plastic-Rubber Hammer features two different heads, one is a hard yellow plastic and the other is soft black rubber. The plastic head helps avoid the type of marring that a steel hammer might cause. The rubber head is helpful for much more delicate work.


Jewellery Polishing Cloth

CODE: BSPC1

$10.50
In stock

Jewellery Polishing Cloth

Tthe Jewellery Polishing cloth safely cleans jewelry, metals, and almost any surface. Soft and felt-like, this amazing cloth is embedded with special no scratch micro-abrasive & chemical cleaning agent which works for double cleaning & polishing action on gold, silver, brass, copper, mirrors and glass.


Jig - Funjig

CODE: WLFJ

Out-of-stock
$58.00

Funjig includes Funjig base, 20 stay tight steel pegs and step-by-step instructions for Wirelace Flower Fun Basics. Tired of jigs where the pegs dont stay put? Or the pegs are too short to keep the wire from popping off? What if you could comfortabley hold the jig in your hand to help wrap the wire.

Create stunning dimensional flowers on the Funjig with Wirelace, coloured wire, Epoxy clay and Swarovski Elements. Instructions show how to make three different flower sizes on the Funjig. With just one yard of 6mm Wirlace make a larger flower with less petals or smaller one with more petals. Sculpt the petals to curve up, down, straight or a combination.

by Wirelace


Jig - Thing-A-Ma Jig - Beginner

CODE: BSJIG25

Out-of-stock
$17.25

The Thing-A-Ma-Jig allows crafters to form wire into stunning designs. The patterns and shapes that can be created are endless.

This is such a neat little tool, it is great for creating unique catches, chandelier earring parts, chain link, and funky feature pieces for neckalces and bracelets.

The beginner kit includes - a clear plastic 3"x 4" jig which can be placed on top of any design.
                                       pegs
                                       3 patterns, and instructions for use
                                       1.8m each of gold, silver and copper coloured wire

Jig - Thing-A-Ma Jig - Deluxe

CODE: BSJIG100

$47.10
In stock

The Thing-A-Ma-Jig allows crafters to form wire into stunning designs. The patterns and shapes that can be created are endless.

This is such a neat little tool, it is great for creating unique catches, chandelier earring parts, chain link, and funky feature pieces for neckalces and bracelets.

This Deluxe version is great, because it is heavier than the beginner Jig, it holds still a lot better when you are using it. Also, being quite sturdy, this is sure to last a life time.

This Deluxe kit includes - aluminium 41/2"x51/2" wire jig
                                     aluminium pegs
                                     6 patterns and instructions

Jump Ring Tool Maker - EZ Jump Rings

CODE: BSEZR2

$19.00
In stock

EZ Jump Rings Tool

Make the jump rings you need in the size and wire gauge you require.

Try coiling vivid wires to create coloured jump rings that add definition and texture to jewellery designs. Use gold-filled, sterling or base metal wire to fashion components that complement your designs.


Looper - 1 Step

CODE: BSPLLOOP1

$51.75
In stock

1 Step Looper.

With the 1 Step Looper, create and trim loops in one easy step and customize the lenght of eye pins. Make a consistant size loop every time.

The 1 Step Looper works with dead-soft or half-hard precious metal wire, craft wire, and copper or brass core wire. Bends and trims wire between 24 gauge - 18 gauge.

by BeadSmith


Mallet - Dual Head - Mini - 3-in-1

CODE: BSJH105D

$28.90
In stock

This Dual Head Mini Malet is the perfect bench jewelers companion.

Comes with three 20mm interchangable hammer faces. Domed Steel, Flat Steel and Domed Nylon.


Mandrel - 5 Step

CODE: BSP48B

$20.70
In stock

5-Step Mandrel

Beaders and wire artists alike will love this tool for its ability to create consistently sized loops, circles & coils in wire.

5-Step Mandrel is made from stainless steel with a PVC grip handle that is red, the smooth surface will not mar wire. 

Each tool offers 5 diameters. Small mandrel measurements: 1.5, 2.5, 3.5, 4.5, & 5mm Large mandrel measurements: 6, 7, 8, 9, & 10mm


Mandrel - Right Angle

CODE: FR01

$20.55
In stock

Right Angle Mandrel

The Right Angle Wire Mandrel, makes 4 shapes; squares, triangles, circles, and ovals in 23 sizes with just one tool. Craft beautiful wire objects, such as home accent pieces, lovely jewelry & ornaments, or just about anything you can imagine.

Fiskars


Mandrel - Ring - Wooden -11" (28cm)

CODE: BSRS23

$7.45
In stock

Wooden Ring Mandrel.

This Wooden Ring Mandrel is graduated without markings. It is 11"(28cm) long.

Although it does not have ring sizes marked on it, it is very simple to do this yourself. Simply use a ring sizer to measure your finger, silde the sizer down onto the mandrel and either mark the mandrel with a pencil or stick a bit of tape where the sizer sits. Easy.


Mandrel - Ring Stick - Plastic

CODE: BSRS15

$7.80
In stock

Ring Stick Mandrel

Ring Stick Mandrel is made of hard plastic. This ring stick has large, legible markings in white.

Graduated in quarter US Standard Sizes 1-15


Pliers - Nylon Jaw

CODE: BSPL566

$28.75
In stock

Nylon Jaw Pliers

These Nylon Jaw Pliers are ideal wire working tools that will not scratch or damage wire or metal findings. They are superb for straightening wire. These pliers are great for using with coloured wire, as they won't damage or scratch the colour off.

These Nylon Jaw Pliers have Double-leaf sping for smooth operation and extra-fine tips. They are 4.75" (12cm) long and have PVC handles that are black.

These are typically used to create angled bends in wire, close bead tips, open and close jump rings and form loops.

by BeadSmith


Pliers - Wire Twisting

CODE: BSTP6

$36.80
In stock

Wire Twisting Pliers

Wire Twisting Pliers is a versatile tool to help you doreliable safetywiring (loockwiring) rapidly and consistenly.

Clamp down on your craft wire and secure with a vise on the other side. Simply pull the end and watch the wire twist into perfectly uniform spirals. The more you twist the tighter the spirals.

Excellent when working with coloured wire.


Pliers - with Spring Handle

CODE: BSPL511

$16.10
In stock

Pliers with Spring Handle.

A good choice for a professional tool at a very good economy price.  Additional features include:
• Polished steel head
• Double-leaf spring for smooth operation
• Box joint construction
• PVC handles.

by BeadSmith


Sizer - Ring

CODE: BSRS22

$14.90
In stock

Ring Sizer measures ring sizes 1-15, including half sizes. (US sizes)

Ring Sizers are easy and convenient finger gauge you will never have to look for a gauge again.


Sizer - Ring - Alloy

CODE: PHRS01

$15.35
In stock

Ring Sizer

Ring Sizers are easy and convenient finger gauge you will never have to look for a gauge again.


Sizer Set - Ring

CODE: PHRSSET

$22.35
In stock

Jewelry Measuring Tool Set with Aluminium Ring Size Sticks Mandrel and Alloy Ring Sizers

Size: Stick: about 25mm in diameter, 250mm long
         Ring: about 11~22mm inner diameter, 28pcs/set.

Tweezers - Fiber Grip - Lock - Curved

CODE: BSTW396

$17.55
In stock

Fiber Grip Lock Curved Tweezers.

Tweezers are tools used for picking up small objects that are not easy to grasp by hand.

Fiber Grip Lock Curved Tweezers open as you squeeze together and when you release they are closed. Awesome if you are wanting to hold something for a while. They are 6.5" (16.5cm) long

by BeadSmith


Vise - Pin

CODE: BSJ80

$9.80
In stock

Pin Vise

This Nickled Pin Vise holds pins in place for precision work.

by BeadSmith


Wire Weaving - Artistic Wire - 4 Prong Wire Knitter Tool

CODE: BS228S434

$13.25
In stock

Artistic Wire 4 Prong Wire Knitter Tool

Knit rope using the Artistic Wire Knitter Tool. This 4 prong tool will create a looser weave.

Included are photo and written instructions.


Wire Weaving - Artistic Wire - 6 Prong Wire Knitter Tool

CODE: BS228S436

$13.25
In stock

Artistic Wire 6 Prong Wire Knitter Tool

Knit rope using the Artistic Wire Knitter Tool. This 6 prong tool will create a tighter weave.

Included are photo and written instructions.


Wire Weaving - Deluxe Wire Draw Plate

CODE: BSDPDELUXE

$28.20
In stock

Deluxe Wire Draw Plate.

This little gadget allows you to draw your wire down to a smaller diameter. Perfect for wire knitting, crocheting, and much more! The results are beautifully smooth and round chain lenghts.

For use with Gold, Silver and Artisitc Permanent Coloured Copper Wire.


Wire Weaving - Knitting Spool - Wooden - 5 Pin

CODE: WTKS5P

$45.25
In stock

Knitting Spool. For all you wire lovers out there, who love to knit, crochet, twist, curl and dream wire… this is the tool for you!

This Knitting Spool is made from Hard Maple Wood. It has been grooved too fit your hand for more ergonomic working. Each spool comes packaged in a plastic tube with a stylus for manipulating the wire to created wire and bead necklaces.

The Knitting tool has 5 wire pins at the top to knit through.


Wire Weaving - Viking Knit 1/2 inch Wire Weaving Tool by Lazee Daizee

CODE: BSVK2233

$50.55
In stock

The Lazee Daizee Viking Knit 1/2 inch Wire Weaving Tool. 

The Wire Weaving Tool includes - 12-loop Easy Step head insert and a 1/2" rod.
                                                 pin tool
                                                 colour photo Steps instructions and finishing techniques.

Supplies needed - wire (26 gauge wire is recommended for beginners), round nose pliers and draw plate.

Not included and optional - 20 gauge wire and .055 (1.4mm) coiling tool to make end caps.

Recommended for wire 24 gauge to 30 gauge. Most wire brands or types an be used from craft wire to fine silver and gold.


Wire Weaving - Viking Knit 1/4 inch Wire Weaving Tool by Lazee Daizee

CODE: BSVK2222

$43.10
In stock
The Wire Weaving Tool includes - 6-loop Easy Step head insert and a 1/4" rod
                                                 pin tool
                                                 colour photo Steps instructions and finishing techniques

Supplies needed - wire (26 gauge wire is recommended for beginners), round nose pliers and draw plate.

Not included and optional - 20 gauge wire and .055 (1.4mm) coiling tool to make end caps.

Recommended for wire 24 gauge to 30 gauge. Most wire brands or types an be used from craft wire to fine silver and gold.


Wire Weaving - Viking Knit All-in-One Kit by Lazee Daizee

CODE: BSVK1111

Out-of-stock
$78.40

The Lazee Daizee Viking Knit All-in-One Weaving Tool Kit makes learning the centuries old wire weaving technique easier than ever. No more start-up prep, dowels or vises, just hold the tool in your hand and start weaving.

Kit Includes: hex rod tool
                   easy-start head attachment
                   lightweight and durable thermoplastic draw plate
                   conditioning fabric
                   end coil shaper
                   pin tool
                   #20 and #26 gauge practice wire 
                   colour step by step photos and instructions
Free Shipping for orders over $100