Metal Working Tool

Bench Block - Steel


In stock

Steel Bench Block

These Bench Blocks are made of Finely Polished Case–Hardened Steel. They are excellent for Laying out work, Flattening Wire and Chasing. Keep this on your work surface, and use it to strengthen your wire work designs and create unique flatten/hammered wire pieces. 

Using a Chasing Hammer, you can strengthen your designs by striking the wire with one or two hits. Using a Ball Pein Hammer, you can create unique textures on your wire and metal pieces. To help reduce the amount of flattening the hammer does to your wire when you hit it to harden it, a Plastic Hammer or Rawhide Mallet could be used.

by BeadSmith

Bench Pin


In stock

Bench Pin

A bench pin is a notched piece of wood that is attached to your work table or work bench to aid with sawing. It also helps steady your hands and tools to do intricate work in small spaces. You can snugly anchor numerous tools, like the ring clamp and pliers, into the notch to aid with filing, polishing, and setting gemstones.

This is not notched in the middle and you will need to saw the notch. The pin is inserted into a metal holder and secured with a screw on the side. The metal holder is then bolted to the bench.

Bench Pin with V-slot and Clamp


In stock

Bench Pin with V-slot and Clamp

Clamp to surfaces up to 2" (5cm) thick and offers the combination of a milled, smooth anvil with a replaceable wooden pin

Quality hardwood with a deluxe clamp which clamps easily onto benched edge with up to 1-3/4" (4.5cm) thick.

Brush - Hard Bristles - Plastic Handle


In stock


This Hard Bristle brush is great for removing rust and dirt from metal surfaces. It features hard nylon bristles mounted in a heavy duty clear plastic handle.

Can also be used to help polish PMC work.

Doming Block - Wooden - 2 Punches


In stock

Wooden Dooming Block

The Wooden Dooming Block works really well with sheet metal, to create cute cupped designs, and for removing dents and shaping thin soft metals.

This Wooden Doming Block set includes 2 hardwood punches and a 21/4" (5.7cm) square wooden dapper block. It features 6 hemisoherical depressions of different sizes, one on each side, and 2 punches. This allows the versatility of a variety of depth domes, all in one compact design.

Hammer - Ball Pein


In stock

Ball Pein Hammer

These Ball Pein Hammers have one flat end & the other is round. It is used for solid striking force. With its solid steel head, it is excellent for flattening & shaping many types of hard or half-hard wires. You will find this tool very comfortable to use because it is geared with a long yet light wooden handle.

Hammer - Nylon


In stock

Nylon Hammer

This Nylon Hammer has a wooden handle. This hammer cand be used to flatten and shape sheet and wire with no risk of marring. The faces can easily be removed with a half turn.

Hammer - Plastic & Rubber


In stock

Plastic and Rubber Jewellery Hammer

This lightweight Plastic-Rubber Hammer features two different heads, one is a hard yellow plastic and the other is soft black rubber. The plastic head helps avoid the type of marring that a steel hammer might cause. The rubber head is helpful for much more delicate work.

Mallet - Brass


In stock

Brass Mallet

This Brass Mallet has a well made wooden handle that provides extra strength and durability.

Mallet - Dual Head - Mini - 3-in-1


In stock

This Dual Head Mini Malet is the perfect bench jewelers companion.

Comes with three 20mm interchangable hammer faces. Domed Steel, Flat Steel and Domed Nylon.

Mallet - Rawhide


In stock

Rawhide Mallet

Rawhide Mallets are designed to prevent scratching or marring of the metal, thus assuring the quality of the finished piece. They are excellent for work-hardening, flattening, & smoothing metal.

Made with screws rather then nails or staples to secure the rawhide roll. Hand-crafted in the USA from the finest water buffalo hides & hickory handles.

Mallet - Wooden


In stock

Wooden Mallet

Wooden Mallets are great for removing dents from your wire and flattening your designs.

Ring Stretcher


In stock

With a tap of a hammer, rings can be quickly and economically stretched.

Quickly inlarge rings with this easy to use tool. Simply tapping the end spreads the outer slotted mandrel and stretches the ring. For rings size 6 or larger.

It is recommended stretching rings minimally, normally 1/4 to 1/2 size largeris the maximum.

by CoolTools

Free Shipping for orders over $100