Loading...

Tools


Adhesive - Bail Bond - No Days

CODE: BSBBC-156

$8.20
In stock

Bailbond is a specially formulated heat activated adhesive designed to adhere jewelry bails quickly and with no mess. Easily change out your bails by simply re-heating Bailbond to re-work the bond.

NO Days BailBond is designed with an elevated phase-change temperature of 160F/71C (point at which it is heated and turns from a solid to a liquid). Heat gun or embossing heat tool recommended to provide elevated temperature requirements.


Adhesive - Dazzle Tac - 29.6ml (1FL OZ)

CODE: BSDT01

$17.50
In stock

Dazzel Tac Jewellery Glue

Dazzel Tac is an extra strong, permanent glue for base metals, semi-precious stones, glass, beads, bone, mirror and more. Quick grab for immediate hold, always flexible and never brittle.

Dazzel Tac dries crystal clear and is water-proof and UV resistance for greater durability. Superior impact resistant formula so that stones and findings stay put.

by Beacon


Adhesive - Diamond Glaze - 59.15ml (2FL OZ)

CODE: BSDG2

Out-of-stock
$17.85

Diamond Glaze.

Diamond Glaze is a water-based dimensional adhesive that dries to a clear glass-like finish. It securely hold vellum, glass beads, glitter and many other mediums. Mixable with dye-based inks, watercolours, pearlescent pigments and more.

Use directly over artwork for a raised glass like finish. Thin with water for a lacquer-like finish. Can be coloured with dye ink.


Adhesive - Double sided Tape

CODE: BSttt3

$7.35
In stock

Double Sided Adhesive Tape

Special double-sided tape that adheres to any hard surface and will firmly hold Micro Beads, Seed Beads & Delicas.


Adhesive - Fabric Glue - 118ml

CODE: BSCPFG4

$10.95
In stock

Fabric Glue

Fabric Glue is washable, flexible and dries clear. Glues fabrics together and dries at room temperature for 24 hours. Leave to cure 7-10 days before washing. 

Will not stain most fabrics, but must be tested before use.

by Crafters Pick


Adhesive - Gem-Tac - 59.15ml (2FL OZ)

CODE: BSGT2

$23.30
In stock

Gem-Tac Permanent Adhesive and Embellishing Glue

Gem-Tac is an adhesive that can bond gems, sequins, glitter, 'Micro Beads' and rhinestones to fabric. This glue is ideal for attching rhinestones to porous material (wood, fabric, suede) without damaging the metallic backing.

Gem-Tac requires only a small amount to hold; dries clear. Permanent, water-based, non-toxic and washable. Allow to dry  for 24 hours.

by Beacon


Adhesive - Glaze and Glue

CODE: CFGG2

$26.25
In stock

Glaze & Glue is a thick acrylic goop that cleans up with water, is non-toxicand acid free. Glaze & Glue creates a shiny/matte protective surface on paper.

Great adhesive for  paper, beads, gitter and vellum. One two ounce bottle will make more than a hundred pendants.


Adhesive - Jewel Bond - 118ml

CODE: BSCPJB4

$13.95
In stock

Jewel Bond

Jewel Bond is washable, non toxic and water-based. A glue for gems, rhinestones, sequins, glitter and other decorative embellishments. Gives a permanent washable bond to fabric.

Dries clear and will not stain most fabrics, but must be tested before use. Use as a washable fabric glue as well as gluing decoraive embellishments. It is all right to hand wash after 5 days.

by Crafters Pick


Adhesive - Poly Bonder

CODE: LP27161

$12.20
In stock

Poly Bonder is a high temperature craft adhesive that is designed to work perfectly with polymer clay craft projects.

Poly Bonder is an instant-bond craft adhesive designed for high temperature use. Safe to bake with Polymer clays and fuses in seconds. It is easy, safe and economical to use and has a no mess brush-on applicator. Ideal for general crafting too and can be used with paper, ceramics, plastic and more. For baking at temperatures up to 300˚F.

by Lisa Pavelka


Adhesive - Poly Bonder - Glue Holder

CODE: LP27303-1

$2.50
In stock

No more worries about spilling your bottle of Poly Bonder™. Use this holder to secure the bottle on your workstation. Poly Bonder™ fits securely into the opening either upright or at an angle to get the last bit of Poly Bonder™.

by Lisa Pavelka


Adhesive - Super New Glue - 3g (0.10 oz)

CODE: BSSG3X

$7.40
In stock

Super New Glue

Super New Glue is a  super strength cyanoacrylate adhesive sets and cures rapidly at room temperature. New-Glue bonds rubber, metal, glass, and plastic. This glue dries clear and has an excellent resistance to chemicals and low temperature.


Adhesive - Zap Gel - 3g (0.10 oz)

CODE: BSZAP10

$9.80
In stock

Zap Jewellery Gel

Zap No-Drip Jewellery Gel is the thickest and strongest Cyanoacrylate glue available. The tube comes with a long tapered tip allowing precise application. The extra thick consistency of Zap Gel keeps it from dripping or running.

Zap Jewellery Gel instantly bonds metal, leather, porcelain, wood, plastic or rubber and cures in 15 seconds.


Adhesive - Zap-A-Gap - 14.1g (0.5 oz)

CODE: BSZAP03

$14.45
In stock

Zap-A-Gap Gel

Zap-A-Gap Gel is the best Cyanoacrylate glue available. Fills gaps and bonds anything even oily surfaces.

Zap-A-Gap Gel instantly bonds metal, leather, porcelain, wood, plastic or rubber and cures in 20 seconds.Ideal for gluing memory wire end caps.


Adhesive - Zap-A-Gap - Single Use

CODE: BSZAP105

$15.45
In stock

Single use includes just the right amount of glue for one use. Each of the 5 tubes come with a self-piercing precision applicator tip.

Zap-A-Gap Gel is the best Cyanoacrylate glue available. Fills gaps and bonds anything even oily surfaces.

Zap-A-Gap Gel instantly bonds metal, leather, porcelain, wood, plastic or rubber and cures in 20 seconds.Ideal for gluing memory wire end caps.


Adhesive Lacquer - 3D Crystal - 59.15ml (2FL OZ)

CODE: BS3D2

$17.50
In stock

3D Crystal Lacquer

This 3D Crystal Lacquer is crystal clear, so you can create beautiful handmade jewellery or bring your artwork to three-dimensional life. Less bubbles than similar adhesives.

3D Crystal Lacquer dires clear with a glass-like finish.

Acid free and Non Toxic


Awl - Beading - Metal

CODE: BSAWL3

$4.60
In stock

Metal Awl with Ergonomic Handle.

An Awl is a beading tool used for knotting. The awl makes it easier for you to make consistent and tight knots. Used to form knots between beads and pearls. Comes in handy when you need to open small beads for covering crimps. Guides knots down close to beads.

The Metal Awl features an Ergonomic Handle for comfort and a Fine point to helps loosen knots and tangles.

by BeadSmith


Awl - Beading - Plastic

CODE: PHBK001

$2.50
In stock

Metal Awl with Plastic Handle.

An Awl is a beading tool used for knotting. The awl makes it easier for you to make consistent and tight knots. Used to form knots between beads and pearls. Comes in handy when you need to open small beads for covering crimps. Guides knots down close to beads.


Awl - Beading - Wooden Handle

CODE: BSAWL2

$5.65
In stock

Metal Awl with Wooden Handle.

An Awl is a beading tool used for knotting. The awl makes it easier for you to make consistent and tight knots. Used to form knots between beads and pearls. Comes in handy when you need to open small beads for covering crimps. Guides knots down close to beads.

The Metal Awl features a Wooden Handle for comfort and a Fine point to helps loosen knots and tangles.

by BeadSmith


Bead Board - 18 Slots

CODE: BSBBS12

$17.30
In stock

Bead Board - 18 Slots for bead storage.

Create your own unique pieces of jewelry using these great design boards. Great for jewelry making, craft projects, bead stringing, aligning beads prior to stringing, sorting and organizing your beads.

The bead board has a flocked surface to prevent beads from rolling and six recessed sections for sorting beads and findings. Has eighteen round recessed compartments for holding beads, bead containers, findings and more. Has one 42cm straight narrow channel for designing jewellery. Measurements is both inches and centimeters. The compartments are perfect size for 1.5" (3.81cm) round stack jars

by BeadSmith


Bead Board - Jewellery Design Aid

CODE: DBBBU

$30.75
In stock

The Jewellery Design Aid bead board can help you to: be organized (tip the board and beads will slide off the outer U channel); increase your design skills (3 design channels); and keep your work area neat and clean.

The Jewellery Design Aid bead board is made from durable plastic and wipes clean. If you want to stop your beads from rolling as much you can always insert a plush insert. And then if they get dirty, replace them with a new one.

Each set consists of the following: Main Board
                                                 A “necklace expander” 
                                                 Two removable pegs
                                                 Five removable dividers


Bead Board - Jewellery Design Aid - Insert

CODE: DBBIBL

$6.90
In stock

Jewellery Design Aid Inserts

These lining inserts are designed for the Jewellery Design Aid Designer Bead Boards. They are made from Vivelle™, which is a paper product made in Germany. It has been cut to size to fit into the outer U channel on the Jewelry Design Aid board, and the middle bead holding area as well.

It provides a soft surface for beads and findings. Simply put the inserts in place (non-sticky). They provide a nice color contrast to the boards. If it gets dirty, simply remove and replace with a new one."


Bead Board - Mini

CODE: BSBBU16F

$10.60
In stock

Mini Bead Board

Create your own unique pieces of jewelry using these great design boards. The reason for the U shape is for necklaces, so you can see how the layout will look.

The mini bead board has a flocked surface to prevent beads from rolling and recessed center for holding beads and findings. It has a 16" (41cm) U-shaped channelwith measurements in both inches and centimeters. (Beads and supplies in photo sold separately)

by BeadSmith


Bead Mat - Set of 2 - Mini - 20.5cm x 20.5cm

CODE: BSBM2

$5.95
In stock

Bead mats create a comfortable workspace on any table or tray and help prevent beads from rolling away.

They are made from a super-soft foam like material and are washable!

(Beads and Supplies in photo sold separately)

by BeadSmith


Bead Mat - Set of 3 - 28cm x 35.5cm

CODE: BSBM3

$10.90
In stock

Bead mats create a comfortable workspace on any table or tray and help prevent beads from rolling away.

They are made from a super-soft foam like material and are washable!


(Beads and Supplies in photo sold separately)

by BeadSmith


Bead Mat - Sticky - Small

CODE: BSBMS1

$10.90
In stock

Sticky Bead Mat - Small

Ideal for keeping small beads and parts right where you want them. May be used as a mini bead board to arrange smal jewellery pieces before stringing. When the mat starts to gather dust or debris, smilpy rinse it with water and let it dry. It will refresh and become sticky as when it was new.

The surface feels sticky but leaves no residue.

by BeadSmith


Bead Mat - Sticky - X Large

CODE: BSBMS2

$22.40
In stock

Sticky Bead Mat - X Large

Ideal for keeping small beads and parts right where you want them.One side is indented with U-channels like a traditional bead board to arrange jewellery pieces before stringing. Both sides are marked with measurements in both inches and centimeters. When the mat starts to gather dust or debris, smilpy rinse it with water and let it dry. It will refresh and become sticky as when it was new.

The surface feels sticky but leaves no residue.

by BeadSmith


Bead Nabber

CODE: BSBN1

$5.20
In stock

Bead Nabber

The Bead Nabber is used to pick up seed beads with a touch. The Bead Nabber adjusts to any finger size by either stretching or squeezing the ring. The Bead Nabber holds beads for easy threading and eliminates skewering beads and protects fingers from needle point.

Bead Nabber replacement pads are sold separately.


Bead Oracle

CODE: BSORACLE

$6.00
In stock

Bead Oracle

The Bead Oracle will help you decipher bead measurements, but also how many beads are needed for the length of the item your are going to create - true, designs vary, but this is an excellent starting point. Perfect for the beginning & more experienced bead art jewellery designer.  Also helps with understanding and knowing which gauge beading wire works best with a specific bead type.

The Bead Oracle is credit card size reference tool that fits in your wallet.

by BeadSmith


Bead Reamer - Cordless Replacement interchangeable tips.

CODE: BSBR801-510

$4.95
In stock

Cordless Bead Reamer Replacement interchangeable tips.

These Replacement Tips are for use with the  Cordless Bead Reamer which is perfect for softening rough edges of beads and to smooth and enlarge bead holes.

by BeadSmith


Bead Reamer - Cordless with three interchangeable tips.

CODE: BSBR801

$45.45
In stock

Cordless Bead Reamer with three interchangeable tips.

The Cordless Bead Reamer is perfect for softening rough edges of beads and to smooth and enlarge bead holes.

This Cordless Bead Reamer is lightweight and has an ergonomic handle for comfort. The motor operates at 10,000 rpm. Includes three diamond point tips (large and small tapered tips and an angled tip). Uses two AA batteries (Not included)

Tip: Always use water when cutting with diamond instruments.

by BeadSmith


Bead Reamer - Delux Diamond Coated

CODE: BSBR500

$30.50
In stock

Delux Diamond Coated Bead Reamer.

The Delux Diamond Coated Bead Reamer is used to smooth bead edges to reduce wear on string, cord, thread and wire, and to smooth and enlarge holes in ceramic, glass, stone and other types of beads.

The Delux Diamond Coated Bead Reamer features small and large reaming points and a 45 degree edge reamer (replacements are available to purchase separately). Has a hollow handle for storing diamond points, an easy release chuck that fits into the aluminum housing so that it releases instantly when the collet is unscrewed, an anodized aluminum handle, and a rust-resistant brass chuck.

Please note: Always take proper precautions and wear a face mask when using.

by BeadSmith


Bead Reamer - Diamond - 4 Piece

CODE: BSBR5

$17.25
In stock

Diamond Bead Reamer with 4 interchangable Tips.

The Diamond Bead Reamer with 4 interchangable Tips are intended for use on glass, ceramic or stone beads. Perfect for softening rough edges to prevent them from cutting into thread (tips A and B), and ideal for opening and enlarging bead holes (tips C and D)

The Diamond Bead Reamer features a sturdy Wooden Handle and 4 interchangable diamond grit tips, to ensure you have the right tip for the right bead. It is ideal for softening rough edges of beads and to smooth or enlarge bead holes and a storage tube for bits.

Please note: Always take proper precautions and wear a face mask when using.

by BeadSmith


Bead Reamer - Diamond Tip - 3 Piece

CODE: BSBR600

$19.55
In stock

Diamond Tip Bead Reamer with 3 interchangable Diamond Tips.

The Diamond Tip Bead Reamer is used to smooth bead edges to reduce wear on string, cord, thread and wire (45º Edging Point), and to smooth and enlarge holes in ceramic, glass, stone and other types of beads (Small and Large Reaming Point).

The Diamond Tip Bead Reamer features a sturdy Hollow Aluminum Handle to allow store of tips, a brass chuck, and 3 different size diamond tips with the smallest point 0.5mm and largest 5.25mm.

Tip: As with any reamers, be sure to apply only slow, gentle pressure to avoid breaking or chipping your beads

by BeadSmith


Bead Reamers - Economy - 4 Piece Set

CODE: BSBR4

$14.40
In stock

4 Piece Economy Bead Reamer Set

Sometimes the hole in a bead or pearl is too small, is not straight, or the two holes in some hand-drilled beads may not quite meet. This simple diamond tipped bead reamer is the perfect tool set to quickly solves all those problems. These diamond-tipped reamers are intended for use on glass, ceramic or stone beads. 

These Steel tools are encrusted with industrial grade diamonds and the red and yellow handled reamers are ideal for opening and enlarging bead holes, the green and blue are perfect for softening rought edges to prevent them form cutting into threads.

Please note: Always take proper precautions and wear a face mask when using.

by BeadSmith


Beaders Mini Travel Kit

CODE: BSKIT01

$25.90
In stock

Beaders Mini Travellers Kit.

Mini Bead Board with Full Size Tools

The kit includes: Mini Bead Board 4" x 6.75" (10cm x 71cm) with  16" (40.5cm) U-shaped Channel
                         Aqua Chain Nose Pliers with Cutter 5" (13cm)
                         Yellow Semi-flush Side Cutters 5" (13cm)
                         Green Round Nose Pliers 5" (13cm)
                         Thread Cutter with Cover
                         #5 Knotting Tweezers
                         Plastic Storage Box

by BeadSmith


Beading Foundation - Lacy's Stiff Stuff

CODE: BSSS45

$4.30
In stock

Lacy's Stiff Stuff

Lacy's Stiff Stuff is a beading foundation and craft medium which is perfect for cab beading, bead applique and more. It eliminates the need for frames, hoops, or cardstock when doing beaded cabochons.

Lacy's Stiff Stuff stays stiff after wetting or dyeing without shrinking. Draw on it, trace through it or apply iron-on transfers.


Beading Tweezers with Scoop

CODE: PHTS163

$4.50
In stock

It can be used to nip beads or pendants in place of your hand. Easiness and convenience is its advantages. It is also one of tools for jewelry making.


Bench Block - Steel

CODE: BSBB22

$37.00
In stock

Steel Bench Block

These Bench Blocks are made of Finely Polished Case–Hardened Steel. They are excellent for Laying out work, Flattening Wire and Chasing. Keep this on your work surface, and use it to strengthen your wire work designs and create unique flatten/hammered wire pieces. 

Using a Chasing Hammer, you can strengthen your designs by striking the wire with one or two hits. Using a Ball Pein Hammer, you can create unique textures on your wire and metal pieces. To help reduce the amount of flattening the hammer does to your wire when you hit it to harden it, a Plastic Hammer or Rawhide Mallet could be used.

by BeadSmith


Bench Pin

CODE: BP01

$7.75
In stock

Bench Pin

A bench pin is a notched piece of wood that is attached to your work table or work bench to aid with sawing. It also helps steady your hands and tools to do intricate work in small spaces. You can snugly anchor numerous tools, like the ring clamp and pliers, into the notch to aid with filing, polishing, and setting gemstones.

This is not notched in the middle and you will need to saw the notch. The pin is inserted into a metal holder and secured with a screw on the side. The metal holder is then bolted to the bench.


Bench Pin with V-slot and Clamp

CODE: BSBPW6

$14.75
In stock

Bench Pin with V-slot and Clamp

Clamp to surfaces up to 2" (5cm) thick and offers the combination of a milled, smooth anvil with a replaceable wooden pin

Quality hardwood with a deluxe clamp which clamps easily onto benched edge with up to 1-3/4" (4.5cm) thick.

Free Shipping for orders over $100